Pioneer DRM-7000, DRM-3000 manual English, Installation, SCSI Cable Connection Example

SCSI Cable Connection Example:

¶Install 2 internal drives within the changer in a daisy-chain configuration and connect the drives to the changer. Total length of SCSI cables: approx. 2.1m

(Note that this does not include the length of the cable running from the host computer to the changer.)

Installation
¶ Install 4 internal drives within the changer in a daisy-chain
configuration and connect the drives to the changer.
(Additional cable for 2 drives will be needed.)	English
Total length of SCSI cables: approx. 2.5m
(Note that this does not include the length of the cable
running from the host computer to the changer.)

Rear of changer

Rear plate

Connector panel

Cable

Host

Host computer

Drive 2

Drive 1

Terminator ON

Changer board

			Terminator ON
		Drive 4
Cable for
2 drives		Drive 3
		Drive 2
		Drive 1
	Host

¶Install 6 internal drives within the changer in a daisy-chain configuration and connect the drives to the changer. (Additional cable for 4 drives will be needed.)

Total length of SCSI cables: approx. 2.9m

(Note that this does not include the length of the cable running from the host computer to the changer.)

¶Connect 4 drives directly to the individual host adapters. (Additional four single drive connector panels will be needed and pre-attached multi drive connector panel may be removed.)

Cable for 4 drives

Drive 6

Drive 5

Drive 4

Terminator ON

Single drive connector panel

Drive 4

Host

Drive 3

Drive 2

Drive 1

Host

Drive 3

Host

Drive 2

Host

Drive 1

Host

Host

19

<DRC1184> En