Add
¶Use the » or « keys to specify the slot number to which you wish to add a disc and press the ENT key. (Note that discs may be added by this mode only to slots for which it is confirmed that no disc has been inserted, and that the selection menu displayed will not change when the ENT key is pressed if there is no slot confirmed empty.)
The mailslot tray will open and the following message will be displayed.
¶Place the new disc in the tray and press the ENT key. The tray will close, the following message will be displayed, and the disc will be carried to the specified slot.
When the disc has been added, the message displayed on the LCD message window will return to the initial add disc message with the next slot number corresponding to the condition described above being displayed.
To exit add mode, press the ESC key.
NOTE:
If you cannot add a new disc in add mode, add the disc in swap mode instead.
|
|
|
|
|
|
| Operation |
| ||
|
|
|
|
|
|
|
|
| ||
Hyper submode |
|
| ||||||||
|
|
|
|
|
|
|
|
|
| |
Hyper submode is designed to eject a hyper magazine. Since |
| |||||||||
the |
| |||||||||
| ||||||||||
key to eject a hyper magazine, you must enter this mode to | English | |||||||||
make the ENT key into the eject key. | ||||||||||
| ||||||||||
|
|
|
|
|
|
|
| |||
|
|
|
|
|
|
|
|
| ||
¶ When the ENT key is pressed, the changer will check to |
| |||||||||
see if any hyper magazine discs are currently used in drives. |
| |||||||||
| ||||||||||
If there are such discs currently in drives, the following |
| |||||||||
message will be displayed. |
| |||||||||
|
|
|
|
|
|
| ||||
|
|
|
|
|
|
|
| |||
It is the host computer possessing the authority to return |
| |||||||||
discs in drives to disc magazines. Therefore, if you wish |
| |||||||||
to eject the hyper magazine right now, you must return to |
| |||||||||
user mode first and issue a command requesting the discs |
| |||||||||
be returned from the host computer. |
| |||||||||
When all the discs have been returned to the hyper |
| |||||||||
magazine, the following message will be displayed. |
| |||||||||
|
|
|
|
|
| |||||
¶ Pressing the ENT key will cause the following messages |
| |||||||||
to be displayed and the hyper magazine to be ejected. |
| |||||||||
|
|
|
|
|
|
|
|
|
| |
≠
If you wish to exit this mode without replacing the hyper magazine, press the ESC key three times to return to user mode.
35
<DRC1184> En
