Pioneer DRM-7000 English, Operation, Auto probing, Inquiry submode, Config submode, Info submode

NOTE:

The DRM-7000/DRM-3000 is designed so as to prohibit the use of maintenance submodes from the host computer. Note that while it is possible to enter system administrator mode even though the use of these submodes is prohibited, only the information submodes will be able to be used.

System administrator mode settings screen are displayed in the sequence indicated below.

Operation

Press » key	English
Auto probing

		Press » key
	Inquiry submode
Press « key		Press » key
	Config submode
Press « key		Press » key
	Option submode
Press « key		Press » key
	Info submode
Press « key		Press » key
	Mailslot submode
Press « key		Press » key
	Hyper submode
Press « key		Press » key
	Probe submode
Press « key		Press » key

Door submode

Press the ENT key

Press the ENT key to select a category and then press the ENT key again

Press the ENT key to select the operation to be performed and then press the ENT key again

Press « key		Press » key
	Hot start
Press « key		Press » key
	Auto eject
Press « key		Press » key
	Hyper I/E
Press « key		Press » key
	Alert buzzer
Press « key		Press » key
	Free message
Press « key		Press » key
	Inquiry change
Press « key		Press » key
	FAN NG message

Press « key

Press « key

Pressing the ESC key when in inquiry submode will cause the system to return from system administrator mode to user mode.

NOTES:

¶Do not change the setting of the Inquiry change function. Units are preset at the factory to DRM- 7000 (for DRM-7000 model) and DRM-3000 (for the DRM-3000 model).

¶Do not change the setting of the FAN NG message function. Units are set to factory default of ON.

Log

Contents

Run-statistics

Swap

Remove

Add

25

<DRC1184> En