Pioneer DV-400V-K, DV-600AV-K Additional information Setting the TV system, Resetting the player

Additional information

Setting the TV system

The default setting of this player is AUTO, and unless you notice that the picture is distorted when playing some discs, you should leave it set to AUTO. If you experience picture distor- tion with some discs, set the TV system to match your country or region’s system. Doing this, however, may restrict the kinds of disc you can watch. The table below shows what kinds of disc are compatible with each setting (AUTO, PAL and NTSC).

1 If the player is on, press STANDBY/ ON to switch it to standby.

2 Using the front panel controls, hold

down then press STANDBY/ON to switch the TV system.

The TV system changes as follows:

• AUTO	NTSC
• NTSC	PAL
• PAL	AUTO

Note

•You have to switch the player into standby (press STANDBY/ON) before each change.

Disc		Player setting
Type	Format	NTSC PAL		AUTO
DVD/Super	NTSC	NTSC	PAL	NTSC
VCD/Video CD/
DivX Video/	PAL	NTSC	PAL	PAL
WMV
CD/MP3/WMA/
MPEG-4 AAC/	—	NTSC	PAL	NTSC
JPEG				or PAL
no disc

			09
Resetting the player
Use this procedure to reset all the player’s
settings to the factory default.			English
down the		(stop) button and press
1	Switch the player into standby.
2	Using the front panel buttons, hold
	STANDBY/ON to switch the player back

on.

All the player’s settings are now reset.

DVD-Video regions

All DVD-Video discs carry a region mark on the case somewhere that indicates which region(s) of the world the disc is compatible with. Your DVD player also has a region mark, which you can find on the rear panel. Discs from incompatible regions will not play in this player. In this case the attention sentence

Incompatible disc region number Can’t play disc is displayed on screen. Discs marked ALL will play in any player. The diagram below shows the various DVD regions of the world.

1

2	5
		1
	6
		2
4	5	3
2		4

53

En