Pioneer DV-400V-K, DV-600AV-K operating instructions Hdmi troubleshooting

Additional information 09

HDMI troubleshooting

Problem

No HDMI audio output.

Remedy

•Check whether or not HDMI Out is set to Off. (See HDMI Out on page 39.)

•This unit has been designed to be compliant with HDMI (High Definition Multimedia Interface). Depending on the component you have connected, unreliable signal transfers may result.

•If the front panel HDMI indicator is lit:

–You won’t hear any sound from the HDMI output if the source component is only DVI/HDCP-compatible.

• If the front panel HDMI indicator is unlit then:

–Make sure that you’ve selected this player as the HDMI input in the settings for the component you’re using. You may need to refer to the instruction manual of the component to do this.

–Check that the HDMI cable is connected properly and that the cable isn’t damaged.

–Check that components connected using the HDMI interface are switched on and HDMI compatible.

English

No HDMI video output.	• Make sure that you’ve selected this player as the HDMI input in the
	settings for the component you’re using. You may need to refer to the
	instruction manual of the component to do this.
	• Check that the HDMI cable is connected properly and that the cable
	isn’t damaged.
	• Check that components connected using the HDMI interface are
	switched on and HDMI compatible.
	• This unit has been designed to be compliant with HDMI (High
	Definition Multimedia Interface). Depending on the component you
	have connected, using a DVI connection may result in unreliable
	signal transfers.
	• Make sure the resolution on this player matches that of the
	component you have connected using HDMI. See HDMI Resolution on
	page 40 to change the HDMI resolution. See Resetting the output
	resolution to the default setting with HDMI connection on page 16 if you
	want to reset the output resolution.
No multichannel HDMI	• Make sure the HDMI Out setting is set to Auto, Auto (DSD) or
audio.	LPCM (5.1CH) (see HDMI Out on page 39 to do this). See also About
	the HDMI audio output settings on page 47 and HDMI output with
	DVD-Audio and SACD sources on page 48.
No sound is output from	• Check whether or not HDMI Out is set to Off. (See HDMI Out on
the AUDIO OUT (5.1 ch)	page 39.)
jack when connected via
HDMI.
Component Out cannot	• You can use the Interlace setting if the HDMI Resolution is set to
be set to Interlace.	720 x 480i (NTSC)/720 x 576i (PAL).

57

En