Pioneer DVH-3950MP owner manual DIN Rear-mount

Installation

Trim ring

2Insert the supplied extraction keys into both sides of the unit until they click into place.

!Insert the extraction keys horizontally to the unit. Otherwise, they may be stuck between the mounting sleeve and head unit.

3Pull the unit out of the dashboard.

Section

13

English

Trim ring

2Determine the appropriate position where the holes on the bracket and the side of the unit match.

3Tighten two screws on each side.

!Use either truss screws (5 mm × 6 mm) or flush surface screws (5 mm × 6 mm), de- pending on the shape of screw holes in the bracket.

Screw

Mounting bracket Dashboard or console

DIN Rear-mount

1Extend top and bottom of the trim ring outwards to remove the trim ring. (When reattaching the trim ring, point the side with a groove downwards and attach it.)

!It becomes easy to remove the trim ring if the control panel is released.

En 41