Pioneer KEH-P7020R 03Tuner, Introduction of advanced tuner, operation, frequencies

Section

03Tuner

Introduction of advanced tuner	Storing and recalling broadcast
operation	frequencies

1

1FUNCTION display

Shows the function status.

Press FUNCTION to display the function names.

Press FUNCTION repeatedly to switch between the following functions:

BSM (best stations memory)—REG(regional)— LOCAL (local seek tuning)—PTY(program type selection)—TA(traffic announcement standby)—AF(alternative frequencies search)— NEWS (news program interruption)

• To return to the frequency display, press

BAND/ESC.

•If MW/LW band is selected, you can only select BSM or LOCAL.

Note

•If you do not operate the function within about 30 seconds, the display is automatically returned to the frequency display.

If you press any of the PRESET TUNING buttons you can easily store up to six broadcast frequen- cies for later recall with the touch of a button.

When you find a frequency that you want to store in memory press a PRESET TUNING but- ton and hold until the preset number stops flashing.

The number you have pressed will flash in the PRESET NUMBER indicator and then remain lit. The selected radio station frequency has been stored in memory.

The next time you press the same PRESET TUN- ING button the radio station frequency is recalled from memory.

Notes

•Up to 18 FM stations, 6 for each of the three FM bands, and 6 MW/LW stations can be stored in memory.

•You can also use 5 and ∞ to recall radio sta- tion frequencies assigned to PRESET TUNING buttons.

12En