Pioneer KEH-P7020R Audio Adjustments, Multi-CDPlayer, Using compression and bass emphasis, names

Multi-CD Player

Using compression and bass emphasis

You can use these functions only with a multi-CD player that supports them.

Using COMP (compression) and DBE (dynamic bass emphasis) functions let you adjust the sound playback quality of the multi-CD player. Each of the functions have a two-step adjust- ment. The COMP function balances the output of louder and softer sounds at higher volumes. DBE boosts bass levels to give playback a fuller sound. Listen to each of the effects as you select through them and use the one that best enhances the playback of the track or CD that you are listening to.

1 Press FUNCTION to select COMP.

Press FUNCTION until Comp/DBE appears in the display.

•If the multi-CD player does not support COMP/DBE, No Comp is displayed when you attempt to select it.

2Press 5 or ∞ to select your favorite setting. Press 5 or ∞ repeatedly to switch between the following settings:

Comp OFF—Comp 1—Comp 2—Comp OFF— DBE 1—DBE 2

	Section
Audio Adjustments	07

Introduction of audio
adjustments	English

1	Español
1 AUDIO display
Shows the audio adjustments status.
Press AUDIO to display the audio function
names.	Deutsch
Press AUDIO repeatedly to switch between the
following audio functions:
Fad (balance adjustment)—EQ(equalizer curve
adjustment)—Bass(bass)—Treble(treble)—
Loud (loudness)—Sub-W1(subwoofer1)/Non Fad
(non fading output on/off)—Sub-W2
(subwoofer2)/Non Fad (non fading output set-
ting)—HPF(high pass filter)—SLA(source level	Français
S.W Control:EXT, you cannot switch the Sub-W1.
adjustment)—ASL(automatic sound levelizer)
• When the subwoofer controller setting is only
(Refer to page 38.)
• You can select the Sub-W2only when
Subwoofer output is switched on in the Sub-W1.
• When the subwoofer controller setting is only	Italiano
• You can select the non fading output setting
S.W Control:EXT, you can switch the non fading
output on/off mode. (Refer to page 38.)
mode only when non fading output is switched
on in the non fading output on/off mode.
• When selecting the FM tuner as the source,
you cannot switch to SLA.	Nederlands
• To return to the playback display, press
BAND/ESC.

En 29