Audio Adjustments
Adjusting loudness
Loudness compensates for deficiencies in the low- and
Press AUDIO until Loud appears in the display.
2 Press 5 to turn loudness on.Loudness level (e.g., Loud Mid) appears in the display.
3 Press 2 or 3 to select the level.Press 2 or 3 until the desired level appears in the display.
Low
4Press ∞ to turn loudness off. Loud OFF appears in the display.
Using subwoofer output
This unit is equipped with a subwoofer output which can be switched on or off.
1 Press AUDIO to selectWhen the subwoofer controller setting is S.W Control:EXT, you cannot select
2Press 5 to turn subwoofer output on.
• You can turn off subwoofer output by pressing
∞.
3Press 2 or 3 to select the phase of sub- woofer output.
Press 2 to select reverse phase and Rev. appears in the display. Press 3 to select normal phase and Normal appears in the display.
Section
07
Adjusting subwoofer settings |
| English | |
When the subwoofer output is on, you can | |||
| |||
adjust the |
| ||
of the subwoofer. |
|
| |
1 Press AUDIO to select the |
| ||
When the subwoofer output is on, you can |
| ||
select the |
| ||
(Hz) appears in the display. |
| Español | |
• If the subwoofer setting has been previously | |||
| |||
adjusted, the frequency of that previously |
| ||
selected will be displayed, such as 50 (Hz) or 125 |
| ||
(Hz). |
|
| |
2 Press 2 or 3 to select |
| ||
Press 2 and 50 (Hz) is displayed. Press 3 and | Deutsch | ||
125 (Hz) is displayed. Only frequencies lower | |||
| |||
than those in the selected range are output |
| ||
from the subwoofer. |
|
| |
3 Press 5 or ∞ to adjust the output level of |
| ||
the subwoofer. |
|
| |
Each press of 5 or ∞ increases or decreases | Français | ||
the level of the subwoofer (e.g., +6 to | |||
| |||
Press 5 or ∞ until you see the desired value |
| ||
displayed. |
|
| |
|
| Italiano | |
|
| Nederlands |
En 33