Pioneer KEH-P7020R operation manual 07Audio Adjustments, Setting the sound focus equal- izer

Section

07Audio Adjustments

Note

•If you do not operate the audio function within about 30 seconds, the display is automatically returned to the source display.

•If you switch the SFEQ mode, the H.P.F. func- tion is automatically switched off. By switch- ing the H.P.F. function on after selecting the SFEQ mode, you can combine H.P.F. function with SFEQ function.

Setting the sound focus equal- izer

Clarifying the sound image of vocals and instru- ments allows the simple staging of a natural, pleasant sound environment.

Even greater listening enjoyment will be obtained if seating positions are chosen care- fully.

•FRT1 boosts the treble on the front output and the bass on the rear output.

FRT2 boosts the treble and the bass on the front output and the bass on the rear output. (The bass boost is the same for both front and rear.) For both FRT1 and FRT2 the H setting provides a more pronounced effect than the L setting.

1Press SFEQ to select the desired SFEQ mode.

FRT1-H (front1-high)—FRT1-L (front1-low) — FRT2-H (front2-high)—FRT2-L (front2-low) — CUSTOM (custom) —SFEQ OFF (off)

2Press 2 or 3 to select the desired posi- tion.

Press 2 or 3 until the desired position appears in the display.

LEFT (left) —CENTER(center) —RIGHT(right)

Notes

•If you adjust the bass or treble, CUSTOM memorizes an SFEQ mode in which the bass and treble are adjusted for personal prefer- ence.

Using balance adjustment

You can select a fader/balance setting that pro- vides an ideal listening environment in all occu- pied seats.

1 Press AUDIO to select Fad.

Press AUDIO until Fad appears in the display.

•If the balance setting has been previously adjusted, Bal will be displayed.

2Press 5 or ∞ to adjust front/rear speaker balance.

Each press of 5 or ∞ moves the front/rear speaker balance towards the front or the rear.

• Fad F15 – Fad R15 is displayed as the front/rear speaker balance moves from front to rear.

• Fad 0 is the proper setting when only two speakers are used.

• When the rear output setting is Rear SP:S.W, you cannot adjust front/rear speaker balance. Refer to Setting the rear output and subwoofer controller on page 38.

3Press 2 or 3 to adjust left/right speaker balance.

When you press 2 or 3, Bal 0 is displayed. Each press of 2 or 3 moves the left/right speaker balance towards the left or the right.

• Bal L9 – Bal R9 is displayed as the left/right speaker balance moves from left to right.

30En