Before Proceeding
English
Each operation is described in its proper operating order. These Operating Instructions will refer to the operating controls found on the remote control unit, with the exception of those buttons found only on the main plasma display itself. When the plasma display controls include equivalent buttons to those found on the remote control unit, the commands can be performed on the main unit as well.
The following illustrations are an example of the actual operations used for the section “PICTURE adjustment”. The examples are provided to allow you to confirm whether the operation is performed correctly or not.
Note
The screen images depicted in these Operating Instructions should be considered typical images; some difference will be seen in practice, depending on the screen item displayed and its contents, the input source and various other control settings.
Before Proceeding
PICTURE adjustment
MENU
5/∞
2/3
MENU
2/3
SET
SET
5/∞
Main unit operating | Remote control unit |
panel |
|
1Press the MENU button to display the menu screen.
MENU |
|
|
| INPUT1 | ||
PICTURE |
| SCREEN | SETUP | OPTION |
| |
CONTRAST |
| : | 0 |
|
| |
BRIGHTNESS | : | 0 |
|
| ||
R.LEVEL |
| : | 0 |
|
| |
G.LEVEL |
| : | 0 |
|
| |
B.LEVEL |
| : | 0 |
|
| |
H.ENHANCE | : | 0 |
|
| ||
V.ENHANCE |
| : | 0 |
|
| |
PICTURE RESET |
|
|
|
| ||
SET | ENTER |
| MENU | EXIT | ||
|
|
|
|
|
|
|
2Use the 5/∞ buttons to select the adjustment item, then press the SET button.
MENU |
|
|
| INPUT1 | ||
PICTURE |
| SCREEN | SETUP | OPTION |
| |
CONTRAST |
| : | 0 |
|
| |
BRIGHTNESS | : | 0 |
|
| ||
R.LEVEL |
| : | 0 |
|
| |
G.LEVEL |
| : | 0 |
|
| |
B.LEVEL |
| : | 0 |
|
| |
H.ENHANCE | : | 0 |
|
| ||
V.ENHANCE |
| : | 0 |
|
| |
PICTURE RESET |
|
|
|
| ||
SET | ENTER |
| MENU | EXIT | ||
|
|
|
|
|
|
|
3Use the 2/3 buttons to adjust the picture quality as desired.
| BRIGHTNESS | : 0 |
|
| ||
|
|
| ||||
|
|
| SET |
| EXIT | |
|
|
|
|
|
|
|
4Press the SET button.
Pressing the SET button writes the value into the memory and returns the display to the step 2 screen.
5When the setup is finished, press the MENU button to exit the menu screen.
Note
Make these adjustments for each input (INPUT1 or INPUT2) and signals.
[PICTURE] mode adjustment items
Below are brief descriptions of the options that can be set in the [PICTURE] mode.
CONTRAST ············· Adjust according to the surrounding brightness so that the picture can be seen clearly.
BRIGHTNESS ·········· Adjust so that the dark parts of the picture can be seen clearly.
R. LEVEL ················· Adjust the amount of red in the picture.
G. LEVEL ················· Adjust the amount of green in the picture.
B. LEVEL ················· Adjust the amount of blue in the picture.
H. ENHANCE ··········· Sharpens the image in the horizontal direction.
V. ENHANCE ··········· Sharpens the image in the vertical direction.
To reset [PICTURE] mode settings to the default
If settings have been adjusted excessively or the picture on the screen no longer appears natural, it may prove more beneficial to reset the [PICTURE] mode to default settings instead of trying to make adjustments under already adjusted conditions.
1In step 2 in the previous procedure, use the 5/∞ buttons to select [PICTURE RESET], then press the SET button.
PICTURE RESET
YESNO
| SET | SET | MENU | EXIT |
2Use the 2/3 buttons to select [YES], and press the SET button.
All [PICTURE] mode settings are returned to the factory set default.
25
En
English
PICTURE/SCREEN Adjustment
4
En