Part Names and Functions

Remote control unit

19

0

2-

3=

4

5

6 ~

7!

8

@

When handling the remote control unit

Do not drop the remote control unit or expose it to moisture.

Do not use the remote control unit in a location subject to direct sunlight, heat radiation from a heater, or in a place subject to excessive humidity.

When the remote control unit’s batteries begin to wear out, the operable distance will gradually become shorter. When this occurs, replace all batteries with new ones as soon as possible.

1SCREEN SIZE button

Press to select the screen size (page 21).

2INPUT buttons

Press to select the input (page 19).

3MENU button

Press to open and close the on-screen menu (pages 16 to 33).

4ADJUST (5/∞/3/2) buttons

Use to navigate menu screens and to adjust various settings on the unit (pages 16 to 33).

5SET button

Press to adjust or enter various settings on the unit (pages 16 to 33).

6SUB INPUT button

During multi-screen display, use this button to change inputs to subscreens (page 23).

7SPLIT button

Press to switch to multi-screen display (page 23).

8MUTING button

Press to mute the volume (page 20).

9AUTO SET UP button

When using computer signal input, automatically sets the [POSITION], [CLOCK] and [PHASE] to optimum values (page 26).

0STANDBY/ON button

Press to put the unit in operation or standby mode (page 19).

-DISPLAY button

Press to view the unit’s current input and setup mode (page 20).

=POINT ZOOM button

Use to select and enlarge one part of the screen (page 22).

~SWAP button

During multi-screen display, use this button to switch between main screen and subscreen (page 23).

English

Part Names and Functions

!PIP SHIFT button

When using PinP mode with multi-screen display, use this button to move the position of subscreen (page 23).

@VOLUME (+/–) buttons

Use to adjust the volume (pages 19 and 20).

7

En