English
Operation
Operation
4PARTIAL (*Supported only on
The input signal and the screen maintain a dot to line ratio of 1:1. Display is highly faithful to the source. However, in order to maintain the 1:1 ratio, a portion of the display will not appear on the screen.
768 lines
1024 lines
Use the 5/∞ buttons to adjust the vertical position of the video image on the screen.
5ZOOM (*Supported only on
A portion of the display will not appear on the screen.
768 lines
1024 lines
Use the 5/∞ buttons to adjust the vertical position of the video image on the screen.
Moving the screen position upward or downwardPress the 5/∞ buttons.
When playing a [PARTIAL] or [ZOOM] image (1280 x 1024 input only) from a computer, the vertical position of the screen image can be adjusted. This adjusted position cannot, however, be stored in memory.
Note
The image cannot be moved in the horizontal direction.
22
Enlarging one part of the screen
(POINT ZOOM)
This plasma display allows enlarging of the screen image by ratios of [x 1.5], [x 2], and [x 3]. When enlarging the screen, the 5/∞/2/3 buttons can be used to move the enlarged viewing area around the screen.
¶The range of zoom possible can be confirmed by viewing the
DISPLAY
POINT
ZOOM
5/∞/2/3
1Press the remote control unit’s POINT ZOOM button.
x 1.5 | 66.0 |
24 | R12 |
| 22.1 |
SCROLL | P.ZOOM ZOOM |
Each time the POINT ZOOM button is pressed, the zoom ratio alternates in the following order:
3 OFF | 3 x 1.5 | 3 x 2 | 3 x 3 |
Notes
¶During use of the POINT ZOOM function, the screen size cannot be changed.
¶When using the plasma display in a
En