PICTURE/SCREEN Adjustment
English
PICTURE/SCREEN Adjustment
3Use the 5/∞ buttons to select the adjustment item, then press the SET button.
| MENU |
|
| INPUT1 | ||
| PICTURE SCREEN |
| SETUP | OPTION | ||
|
|
|
|
|
|
|
| POSITION | : | 0 / | 0 |
| |
| CLOCK | : | 0 |
|
| |
| PHASE | : | 0 |
|
| |
SCREEN RESET
SET | ENTER | MENU | EXIT |
4Use the 2/3 and 5/∞ buttons to select the desired value.
÷When the [POSITION] item is selected, the 2/3 buttons control movement in the Horizontal direction (H), and the 5/∞ buttons control movement in the Vertical direction (V).
POSITION
HV
00
| SET | SET | MENU | EXIT |
|
|
|
|
|
÷Use the 2/3 buttons for the adjustments of [CLOCK] and [PHASE].
CLOCK | : | 0 |
SET SET | MENU | EXIT |
Note
If INPUT2 is selected, only the [POSITION] can be adjusted.
5Press the SET button.
Pressing the SET button writes the value into the memory and returns the display to the step 3 screen.
6When adjustment is finished, press the MENU button to exit the menu screen.
[SCREEN] mode adjustment items
Below are brief descriptions of the options that can be set in the [SCREEN] mode.
POSITION
H ··························· Adjust the picture’s position to the left or right.
V ···························· Adjust the picture’s position upward or downward.
CLOCK ···················· Adjust letter breakup or noise on the screen. This setting adjusts the unit’s internal clock signal frequency that corresponds to the input video signal.
PHASE ····················· Adjust so that there is minimum flicker of screen letters or color misalignment. This setting adjusts the phase of the internal clock signal adjusted by the [CLOCK] setting.
Notes
÷The [CLOCK] and [PHASE] adjustment items are supported only for INPUT1.
÷When the [CLOCK] frequency is changed, the [POSITION] command’s horizontal [H] option may require readjustment.
÷If the adjustment items in the [SCREEN] mode are adjusted excessively, the picture may not be displayed properly.
÷When the [AUTO SET UP MODE] set to [ACTIVE], selecting the [POSITION] and [CLOCK] adjust modes will cause a message to be displayed on the screen, but adjustment is possible. However, if the input source is changed, the adjustment value stored in memory will be the one automatically set with the auto setup mode. If you wish to record a manually set adjustment value, set the [AUTO SET UP MODE] to [INACTIVE] (page 26) before beginning your adjustments.
To reset [SCREEN] mode settings to the default
If settings have been adjusted excessively or the picture on the screen no longer appears natural, it may prove more beneficial to reset the [SCREEN] mode to default settings instead of trying to make adjustments under already adjusted conditions.
1In step 3 in the previous procedure, use the 5/∞ buttons to select [SCREEN RESET], then press the SET button.
SCREEN RESET
YESNO
SET SET | MENU EXIT |
2Use the 2/3 buttons to select [YES], and press the SET button.
All [SCREEN] mode settings are returned to the factory set default.
28
En