2Using the 5/∞/2/3 buttons, move the screen to the desired part of the image.
x 1.5
24R12
22.1 |
|
|
| 10 | 50 |
SCROLL | P.ZOOM ZOOM |
|
84.3 | 10 |
÷Pressing the POINT ZOOM and 5/∞/2/3 buttons again will change the zoom ratio and the position of screen enlarged.
÷If the input signal changes, or if the menu screen is displayed and the input is changed, or if the multiscreen mode is selected, the POINT ZOOM function will be canceled.
Multiscreen display
The plasma display’s multiscreen function allows the simultaneous display of two inputs. The multiscreen display include three modes,
DISPLAY
SPLIT 
PIP SHIFT
SUB INPUT | SWAP |
1Press the remote control unit’s SPLIT button. Each time the button is pressed the multiscreen display changes in the following order:
| 3 | 3 PinP | 3 PoutP | 3 OFF |
|
|
| ||||
|
|
|
|
|
|
Operation
1
The main screen is displayed on the left and the subscreen on the right.
66.0
24R12
10 22.1
2PinP
The subscreen is displayed in one of the four corners of the main screen.
66.0
24R12
10 22.1
3PoutP
The subscreen is displayed outside the right side of the main screen.
66.0
24R12
10 22.1
2Press the remote control unit’s SUB INPUT button to select the subscreen input source.
To exchange the main screen and subscreen inputs
Press the remote control unit’s SWAP button.
¶When
The right and left sides of the display will switch; what was previously the main screen will now show the subscreen, and vice versa.
¶When PinP or PoutP has been selected:
What was previously the main screen image will now appear in reduced size as the subscreen image, and
vice versa. | 23 |
English
Operation
En