Installation and Connections

When connecting to ANALOG RGB OUT (INPUT1)

English

Installation and Connections

Connection to a personal computer

Connection method differs depending on the computer type. When connecting, please thoroughly read the computer’s instruction manual.

Before making connections, be sure to make sure that the personal computer’s power and this unit’s main power is off.

Connection to INPUT1

Connect the display’s D-sub input connector to the D-sub output (analog RGB) from the computer.

This connector also supports G ON SYNC (output with green signal combined with sync signal), and composite SYNC (output with combined horizontal and vertical sync signals).

When connecting to ANALOG RGB IN (INPUT1)

 

ANALOG RGB IN

ANALOG RGB OUT

INPUT1

 

 

 

 

D-Sub

D-Sub

AUDIO

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Connect the cable corresponding to the shape of the input terminal on this unit and the personal computer’s output terminal.

Secure by tightening the terminal screws on both units.

Following completing connections, on-screen setup is necessary. See pages 16 to 18 for details.

Note

Depending on the type of computer model being connected, a conversion connector or adapter etc. provided with the computer or sold separately may be necessary.

For details, please read your PC’s instruction manual or consult the maker or nearest dealer of your computer.

 

ANALOG RGB IN

ANALOG RGB OUT

INPUT1

 

D-Sub

D-Sub

AUDIO

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

To an external monitor

With this unit, it is possible to output the video signal to an external monitor or other component from the ANALOG RGB OUT (INPUT1) terminal.

Note

A video signal will not be output from the ANALOG RGB OUT (INPUT1) terminal when the main power of this unit is off or in standby.

Connection to INPUT2

A computer equipped with DVI output (digital RGB signal) can be connected to the video card’s DVI connector.

 

 

 

 

 

 

INPUT2

 

DIGITAL RGB

AUDIO

 

DVI-D

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Following completing connections, on-screen setup is necessary. See pages 16 to 18 for details.

Notes

Use a DVI-D 24-pin (digital only) cable for the connection.

This unit does not support the display of copyguard-protected video signals.

NOTICE

INPUT1 supports Microsoft “Plug & Play” (VESA DDC 1/2B) components. See Appendix 2-1/2 (page 42) when making connections to INPUT1.

See Appendix 1 (pages 38 and 40) for information regarding signals and display formats supported by INPUT1.

NOTICE

INPUT2 supports Microsoft “Plug & Play” (VESA DDC 2B) components. See Appendix 2-2/2 (page 42) when making connections to INPUT2.

See Appendix 1 (pages 39 and 41) for information regarding signals and display formats supported by INPUT2.

12

En