Installation and Connections
CAUTION | NO! |
English
÷Handles should not be removed or reattached by anyone other than the professional installation technician or service personnel.
÷If handles must be removed due to specific installation conditions, the mounting screws should be stored carefully together with the handles. To ensure safety, the mounting screws should be tightened to a minimum torque of 2N·m (20 kgf·cm) when reattaching the handles.
÷When moving the display, it should always be carried by two persons holding the rear handles in the manner shown.
÷Never attempt to move the plasma display by holding only one of the handles.
÷When installing the plasma display, do not use the handles as means of hanging the display; also do not use them as devices to prevent tipping over (see illustration).
| Air vents (fan) |
b hole | b hole |
b hole | a hole | a hole |
b hole | Center line | b hole |
|
Rear view diagram
Air vents (fan)
Attaching surface
Installation bracket, etc..
Main unit |
| a hole | |||||
|
|
| |||||
Center line |
|
|
|
|
|
| Bolt |
|
|
|
|
|
| ||
b hole |
|
|
|
|
| ||
|
|
|
|
|
| ||
|
|
| |||||
|
|
|
|
|
|
|
|
12 mm to 18 mm (1/2 in. to 11/16 in.)
Bolt b hole
12 mm to 18 mm (1/2 in. to 11/16 in.)
Side view diagram
Installation and Connections
Center line
b hole | a hole | a hole |
|
| b hole |
|
| Center line |
|
| |
b hole | b hole | ||||
| |||||
Rear view diagram
11
En