05Preparation

2Attach the stand at the points indicated by the arrows and tighten the installation bolts (2) and (1) firmly using a screwdriver.

Installation bolts (1): M8 x 23 mm (black) for PRO-950HD M8 x 23 mm (black) for PRO-1150HD

Installation bolts (2): M8 x 60 mm (black) for PRO-950HD M8 x 40 mm (black) for PRO-1150HD

Screw hole with “T” inscribed

Installation bolts (1) (Step 2)

Installation bolts (2) (Step 1)

3Replace the plasma display to stand upright.

For speaker installation, see Installing the Pioneer speaker on pages 16 (PRO-1150HD only).

Note

Be sure to install the plasma display in a flat, stable location.

Insert the screws into the holes vertically and tighten them.

Place a sheet or protective cover to protect the display from scratches or damage.

Work only with the plasma display lying flat on a table or similar surface.

When lying the plasma display down, be careful not to scratch or damage it.

If the speaker has been installed, it is recommended to detach the speaker before attaching the stand (for PRO-1150HD only).

22

En

Page 22
Image 22
Pioneer PRO-950HD manual Preparation