Pioneer PRO-950HD manual Preparation, Installing the plasma display, Moving the plasma display

05Preparation

Chapter 5

Preparation

Installing the plasma display (PRO-950HD)

Over 50 cm

(19 11/16 inches)

Over 10 cm

(315/16 inches)

Location

• Avoid direct sunlight. Maintain adequate ventilation.

Note

•Allow enough space around the upper and back parts when installing to ensure adequate ventilation of the rear of the unit.

Moving the plasma display

Because the plasma display is heavy, be sure to have someone help you when moving it.

(PRO-1150HD)

Caution

When installing on a rack, etc., hold the plasma display.

Installing the Pioneer speaker

(PRO-1150HD)

Caution

•Do not move the display holding on to the mounting fittings. This can result in injury or damage to the unit.

About the speaker

•In order to prevent damage to the speaker system resulting from input overload, please observe the following precautions:

•Do not use the speaker with anything other than the plasma display. Doing so may result in damage or fire.

•Be sure to turn the connected devices off and remove the power cord from the power outlet beforehand when changing the connection or installation method.

•When using a tone control function to greatly emphasize treble sounds, do not use excessive amplifier volume.

•Please handle the speaker with sufficient care, as the grille net and the cabinet can become damaged or broken when they are subjected to strong external impacts.

•Placing a CRT computer screen or CRT monitor near to the speaker may result in interference or color distortion. If this happens, distance the monitor from the speaker.

Installation

•When installing the speaker, do not use any screws other than those supplied, otherwise the speaker may come off from the main unit and fall over.

•When installing the speaker, tighten the screws firmly.

16

En