Pioneer PRO-950HD manual Setting MTS/SAP mode, When receiving Stereo sound signals

Basic Operations 06

Setting MTS/SAP mode

When watching conventional TV programs, you may enjoy stereo sound and/or Secondary Audio Programs (SAP), using the Multi- channel Television Sound (MTS) function.

•Stereo broadcasts

You can enjoy, for example, sports, shows, and concerts in dynamic stereo sound.

•SAP broadcasts

MAIN sound: The normal program soundtrack (either in mono or stereo).

SAP sound: Listen to second language, supplementary commentary and other information. (SAP is mono sound.)

When receiving STEREO sound signals

A 125
STEREO	In STEREO mode
A 125
STEREO	In SAP mode
A 125
MONO	In MONO mode

Note

When receiving MONO + SAP sound signals

• Conventional TV channels in this manual designate TV

channels that are received through the conventional VHF/UHF

frequencies or conventional cable TV channels.

• When stereo sound is difficult to hear, you may manually

switch to the MONO mode to obtain clearer sound.

• Once the MONO mode is selected, the plasma display sound

remains mono even if the system receives a stereo broadcast.

You must reselect the STEREO mode if you want to hear stereo

sound again.

• Selecting MTS while the input source is INPUT 1 to INPUT 7 or

PC does not change the type of sound. In this case, sound is

determined by the video source.

• The MTS button is disabled while the TV Guide On Screen™

A125

MONO (SAP)

A125

SAP (MAIN)

A125

MONO (SAP)

In STEREO mode

In SAP mode

In MONO mode

system is displayed.

When receiving STEREO + SAP sound signals

• In each of the MTS/SAP modes selected, the display changes

depend on broadcast signals being received.

Each time you press MTS, MTS toggles as shown below.

A125

STEREO (SAP)

A125

SAP (STEREO)

A125

MONO (SAP)

In STEREO mode

In SAP mode

In MONO mode

STEREO mode SAP mode MONO mode

When receiving MONO sound signals

STEREO SAP MONO

A125 MONO

A125 MAIN

In STEREO mode

In SAP mode

A125 MONO

In MONO mode

29

En