Safety Precautions

02

Installation Precautions

Observe the following precautions when installing with any items such as the optional bracket.

When using the optional brackets or equivalent items

Ask your dealer to perform the installation.

Be sure to use the supplied bolts.

For details, see the instruction manual that comes with the optional bracket (or equivalent items).

When using other items

Consult your dealer.

The following six mounting holes can be used for the installation:

Rear view (PRO-1150HD)

Side view

Mounting surface

 

 

 

Plasma

Mounting

 

bracket (or

 

display

 

equivalent item)

 

 

Mounting hole

Mounting hole

 

 

Median line

M8 screw

 

 

 

 

12 mm to 18 mm

 

 

(0.5 inches to 0.7 inches)

Median line

 

 

Rear view (PRO-950HD)

 

 

Mounting

Mounting hole

hole

Median line

Median line

Caution

Be sure to use four or more mounting holes symmetrical to the vertical and horizontal median lines.

Use M8 screws, which go 12 mm to 18 mm (0.5 inches to 0.7 inches) in depth from the mounting surface of the plasma display. See the side view above.

Be careful not to block the ventilation opening at the rear of the plasma display.

Be sure to install the plasma display on a flat surface because it contains glass.

The screw holes other than the above are to be used only for the specified products. Never use them for mounting non-specified products.

Note

• It is strongly recommended to use the optional Pioneer mounting products.

• Pioneer shall not be liable for any personal injury or product damage that results from the use of mounting items other than the optional Pioneer products.

11

En

Page 11
Image 11
Pioneer PRO-950HD Installation Precautions, When using the optional brackets or equivalent items, When using other items