DCP200 Profile Controller & Recorder -Product Manual
51-52-25-150, Issue 1 April 2009 Installation Page 15
2Installation

Unpacking

1. Remove the product from its packing. Retain the packing for future use, in case it is
necessary to transport the instrument to a different site or to return it to the supplier for
repair/testing.
2. The instrument is supplied with a panel gasket and push-fit fixing strap. Concise manual(s)
are supplied with the instrument, in one or more languages. Examine the delivered items
for damage or defects. If any are found, contact your supplier immediately.

Installation

CAUTION:
Installation should only be performed by technically competent personnel. It is the
responsibility of the installing engineer to ensure that the configuration is safe.
Local Regulations regarding electrical installation & safety must be observed (e.g.
US National Electrical Code (NEC) or Canadian Electrical Code).
Figure 1. Main dimensions

Panel-Mounting

The mounting panel must be rigid and may be up to 6.0mm (0.25 inches) thick. The cut-out
size is:
92mm x 92mm (+0.5mm / -0.0mm).