DCP200 Profile Controller & Recorder -Product Manual
51-52-25-150, Issue 1 –April 2009 Electrical Installation Page 35

Option Slot 3 -Transmitter Power Supply Module

If option slot 3 is fitted with a transmitter power supply module, make connections as
illustrated. The output is an unregulated 24V DC, 22mA supply.
Figure 31. Option Slot 3 -Transmitter Power Supply Module
Option Slot A Connections

Option Slot A Connections –Basic Auxiliary Input Module

If option slot A is fitted with a basic auxiliary input module, connect as shown. Consider using
the full auxiliary input (Option Slot B) instead, as this has additional features and leaves
option slot A free for other modules.
Figure 32. Option Slot A – Basic Auxiliary Input Module

Option Slot A Connections -Digital Input AModule

If a digital input module is fitted in option slot A, this may be connected to either voltage free
contacts (e.g. switch or relay), or a TTL compatible voltage. Connections are shown below.
Figure 33. Option Slot A – Digital Input A Module

Option Slot A Connections -Ethernet Communications Module

If option slot A is fitted with the Ethernet communication module, a standard RJ45 connector
is accessible from the top of case. No rear connections are required.
10
11
_
12
+
16
17
_
+
16
17
_
+