DCP200 Profile Controller & Recorder -Product Manual
Page 64 Configuration & Use 51-52-25-150, Issue 1 –April 2009
Table 24. Product Information Screens
Product Information Mo
de:
Input Calibration Status Calibration status of the mVDC, VDC, mADC, RTD and
Thermocouple CJC inputs. Caution: Re-calibrate the unit if any inputs
are not shown as “Calibrated”.
Calibration Check Due
Date
The date re-calibration is due. –Only shown if the Calibration
Reminder is enabled in the Input Configuration menu.
Option Slot n
Information
The type of Option Modules (if any) fitted in Option Slot s 1 to 4 and A
to C.
Controller Feature
Information
Shows the features fitted/enabled in the instrument:
Controller Only; USB Port; Data Recorder (includes USB Port) or
Profiler.
Firmware Information The type and version of firmware installed in the instrument.
Serial Number The instruments serial number.
Date of Manufacture The instrument’s Date of Manufacture
Service Information Mode
This is a read only mode. It provides contact information to the user about where they can
obtain service, sales or technical support for the product. Normally this shows either the
manufacturer or supplier details. Using the PC software, the user can enter their own details.
There are 7 lines of text - each up to 26 characters in length.

Navigating Product Information Mode

There are no other screens in this mode.
Hold down and press to return to the Main Menu
Table 25. Service Contact Information Screen
Service Information Mode:
For Service Contact Contact information for Service, Sales or Technical Support.