DCP200 Profile Controller & Recorder -Product Manual
51-52-25-150, Issue 1 –April 2009 PC Software Page 165
16 PC SOFTWARE
The primary function of the software is to create, download and store instrument
configurations and profiles. Additionally, changes can be made to the operation of the
instrument; adding extra screens into Operation Mode, enabling and configuring Supervisor
Mode, changing the contact details or the function of the front LED’s. The software can also
be used to download a new language file or to change the start-up “splash screen”. An on-
screen simulation of the instrument can be setup and tested on a configurable load simulator.
A additional software tool is available to set the IP address required for the Modbus TCP
communications option -refer to the IP Address Configuration section.

Using The Software

The menus and button bar are used to select the main parameter screen or one of the other
modes or functions. Hover the mouse over the parameter description or value to view a fuller
description. Consult the comprehensive help (available from the Help Menu) for information
about the general software functions.
Menus
Button Bar
Pa
rameter Address (hex)
Parameter Values
Functional Groups
Mode Drop Down
Description
Value Range
Figure 54. Main Parameter Screen
The main parameter screen is used to change all of the configuration and other settings. This
screen also allows access to the Supervisor and Enhanced Operation Mode configuration
screens from the Mode drop-down list. The Button bar or Device and View menus are used
to access the other software functions.
View & Device Menus
Instrument Simulation
Parameter Configuration
Profile Editor
Trend
Figure 55. Button Bar & View Menu