Pioneer PRO-950HD manual Comparing picture adjustments on the screen, Sound adjustments

11Adjustments and Settings

Comparing picture adjustments on the screen

During picture adjustments, you can quickly refer to the image previously set in the same parameter, allowing you to easily compare and select the preferred image quality.

1Press HOME MENU.

2Select “Picture” (/ then ENTER).

3Select an item to be adjusted (/ then ENTER).

4While performing adjustment, press BLUE on the remote control unit.

“Before” displays and the image adjusted last time appears for comparison.

Before

5Press the button again to return to the newly adjusted image.

Each press of the button toggles between “Before” and “After”.

6Repeat steps 1 and 5 for other parameters.

7Press HOME MENU to exit the menu.

Caution

•If you exit the menu by pressing HOME MENU or no operation is performed for 60 seconds, all the parameter settings displayed last are stored in memory.

•If you want to exit the menu without performing the adjustments (or leaving the settings disabled) on the “After” screen, switch to “Before” and then exit.

Note

•You cannot adjust any item while on the “Before” screen. A warning message appears.

•When you switch to another parameter, make sure to change the display from “Before” to “After” first, otherwise you cannot select “Before”. A warning message appears if you don’t.

•If you exit the selection from the “Before” screen, the previous entry is stored in the memory and the button no longer works.

•If you exit the selection from the “After” screen, the new entry is stored in the memory and the button no longer works.

•If you move and change the “AV Selection” parameter, the new entry in the current parameter is stored in the memory and the button continues to work.

•You cannot compare images between different parameters on the “AV Selection” menu (“STANDARD” and “MOVIE”, for example).

•When you select this function, “OPTIMUM” on the “AV Selection” menu, “Intelligent Mode” for “Pro Adjust” on the “Picture” menu and “Room Light Sensor” on the “Option” menu are set to off and image quality returns to default settings.

•This function is not selectable:

-when you select “AV Selection”,

-when you select “Yes” or “No” on the confirmation screen for “Reset” from the “Picture” menu or

-when you select a menu from the PC source

58

Sound adjustments

You can adjust the sound quality to your preference with the following settings.

Adjust the sound to your preference for the chosen AV Selection option. See page 53.

1Press HOME MENU.

2Select “Sound” (/ then ENTER).

3Select an item to be adjusted (/).

4Select the desired level (/).

Sound	STANDARD
Treble	2
Bass	0
Balance	0
Reset
Sound Effect

Item	button	button
Treble	For weaker treble	For stronger treble
Bass	For weaker bass	For stronger bass
Balance	Shifts the audio balance to	Shifts the audio balance to
	the left	the right

5Press HOME MENU to exit the menu.

Note

•You cannot adjust the sound for listening with headphones.

•If you perform sound adjustments with headphones connected, the new settings will become effective as soon as you disconnect the headphones.

•To restore the factory defaults for all the items, press / to select “Reset” in step 3, and then press ENTER. A confirmation

screen appears. Press / to select “Yes”, and then press

ENTER.

En