Wacom PTK-650, PTH-850, PTH-450, PTK-450, PTH-650 user manual Adjusting TIP Feel and DOUBLE-CLICK

ContentsIndex

51

ADJUSTING TIP FEEL AND DOUBLE-CLICK

To adjust the tip sensitivity of your pen, select the PEN tab.

Customizes the amount of pressure needed to click, draw, or ink.

To create broad brush strokes or to click with a light touch, use a SOFT tip setting. For maximum control while drawing thin lines, use a FIRM tip setting.

Click to further customize the tip sensitivity.

With your screen cursor positioned over an empty area of the control panel, press down on

the tablet with the pen tip. Use the pressure bar to determine how hard you must press on the pen to reach maximum pressure.

Tips:

Adjusts the size of the double-click area. Drag slider to OFF if you do not want double-click assist.

•Use a soft TIP FEEL for a wider range of pressure values in most pressure-sensitive applications.

•In some applications a soft pressure setting can make the pen overreact so that slight pressure on the pen will be magnified on the screen. If you experience this, try a firmer TIP FEEL setting.

•To make double-clicking easier, expand the tap area that accepts a double-click (the double-click distance).

•A large double-click distance may cause a delay at the beginning of brush strokes in some drawing applications. This may also cause a delay at the beginning of a drag action or inking stroke. If you notice such effects, try setting a smaller double-click distance and using the side switch to double-click. You can also set an ExpressKey to double-click.

ContentsIndex

51