If you encounter problems with touch, it is a good idea to first check the assigned touch functions or reset them to their default conditions.
To further test touch:
1.Attempt to move the screen cursor by tracking your finger across the tablet surface. Then tap to select an item. A status LED should brighten when you touch the active area of the tablet. See also testing your tablet.
2.Open the Wacom Tablet control panel and click on the ABOUT button. In the dialog box that appears, click DIAGNOSE.... The DIAGNOSTICS dialog box shows dynamic information about the tablet, your Intuos5 tool(s), and appropriate information for
3.With the DIAGNOSTICS dialog box open, touch the tablet surface with first one, then with two fingers. Each time you touch the tablet surface, a tablet status LED should brighten and the TOUCH INFO state should change.
4.When you are done, click the CLOSE button to exit the dialog box.
ContentsIndex
45
