ContentsIndex
92
TESTING THE TABLET CONTROLS AND TOOLS
If your Intuos5 tools or tablet controls do not work as you expect, it is a good idea to first check the assigned functions or reset them to their default conditions. You will also want to do this if you have a
A quick way to return a tool to its default condition is to remove it from the control panel TOOL list. Do this by selecting the tool and clicking on the TOOL list [ – ] button. After the tool has been removed, place it back onto the tablet surface. The tool will be added back to the TOOL list with its default settings.
•Open the Wacom Tablet control panel and click on the ABOUT button. In the dialog box that appears, click DIAGNOSE.... The DIAGNOSTICS dialog box shows dynamic information about the tablet, your tool(s), and appropriate information for
•If more than one tablet is connected to your system, in the TABLET INFO column select the unit for which you are testing.
•Use the information shown in the DIAGNOSTICS dialog box when testing your tablet and tools.
Note: If a tool button is set to RADIAL MENU or OPEN/RUN..., that function will occur when the button is pressed. In this case you may want to change the button function before testing.
Testing the ExpressKeys
Testing the Touch Ring
Testing a pen
Testing touch
Testing the mouse
ContentsIndex
92
