Controls and displays | 04 |
SB – Depending on the source, this lights when a signal with surround back channel encoding is detected.
DIGITAL – Lights when a digital audio signal is detected.
2 DIGITAL – Lights when a Dolby Digital encoded signal is detected.
ANALOG – Lights when an analog signal is detected.
DTS – Lights when a source with DTS encoded audio signals is detected.
2
Lights to indicate decoding of a DTS multichannel signal.
3 2 DIGITAL
Lights to indicate decoding of a Dolby Digital multichannel signal.
4 2 PRO LOGIC IIx
2 PRO LOGIC II lights to indicate Pro Logic II decoding. 2 PRO LOGIC IIx lights to indicate Pro Logic IIx decoding (see Listening in surround sound on page 27).
5 VIR.SB
Lights during Virtual surround back processing (page 31).
6 DIRECT
Lights when source Stream Direct playback is in use. Direct playback bypasses the tone controls for the most accurate reproduction of a source.
7 AUTO SURR.
Lights when Auto Surround (see Auto playback on page 27) or XM HD Surround (page 53) is on.
8 ATT
Lights when ANALOG ATT is used to attenuate (reduce) the level of the analog input signal.
9 SLEEP
Lights when the sleep mode is active (see Remote control below).
10 | Tuner indicators |
| |||
| – Lights when the mono mode is set | English | |||
| using the MPX button. | ||||
|
| ||||
| – Lights when a stereo FM broadcast is |
| |||
| being received in auto stereo mode. |
| |||
| – Lights when a broadcast is being |
| |||
| received. |
| Deutsch | ||
11 | Speaker indicators |
| |||
|
| ||||
Lights to indicate the current speaker system, |
|
| |||
A and/or B (page 57). |
|
| |||
12 | Character display |
|
| ||
| Français | ||||
13 | Neo:6 |
| |||
Lights to indicate Neo:6 processing. |
| ||||
14 | ADV.SURR. (Advanced Surround) |
| |||
Lights when one of the Advanced Surround |
|
| |||
|
| ||||
modes has been selected. |
| ||||
Italiano | |||||
signal. | |||||
15 | WMA9 Pro |
| |||
Lights to indicate decoding of a WMA9 Pro |
| ||||
16 | MIDNIGHT |
| |||
| |||||
Lights during Midnight listening (page 31). |
|
| |||
| Nederlands | ||||
17 | D.E. |
|
| ||
|
| ||||
Lights when Dialog Enhancement is switched |
|
| |||
on (page 32). |
|
| |||
18 | LOUDNESS |
|
| ||
|
| ||||
Lights during Loudness listening (page 31). | Español | ||||
encoded signal is detected. | |||||
19 | EX |
| |||
Lights when a Dolby Digital Surround EX
20Master volume level Shows the overall volume level.
21MCACC channel EQ / Sound Retriever indicators
These indicators show the EQ balance for each channel in Checking your Acoustic Calibration EQ settings on page 39. Also, L and R light when the Sound Retriever is active (page 32).
23
En
