Listening to your system

05

Using Virtual Surround Back (VSB)

When you’re not using surround back speakers, selecting this mode allows you to hear a virtual surround back channel through your surround speakers. You can choose to listen to sources with no surround back channel information, or if the material sounds better in the format (for example, 5.1) for which it was originally encoded, you can have the receiver only apply this effect to 6.1 encoded

sources like Dolby Digital EX or DTS-ES.1

The table indicates when you will hear the virtual surround back channel (=Sound plays through surround speaker(s)).

Press SB ch (SB ch PROCESSING) to select a virtual surround back channel option. Each press cycles through the following:

VSB ON – Virtual Surround Back is always used (for example, on 5.1 encoded material)

VSB AUTO – Virtual Surround Back is automatically applied to 6.1 encoded sources (for example, Dolby Digital EX or DTS-ES)

VSB OFF – Virtual Surround Back mode is switched off

English Deutsch Français

 

SBch

 

Standard

 

 

Type of source

Processing /

Multichannel

 

Stereo sources

 

Advanced

Virtual SB

 

 

surround

 

 

 

 

 

mode

sources

2Pro Logic II x

2 Pro Logic

Neo:6

 

 

 

 

 

 

 

 

Dolby Digital EX/DTS-ES/

ON

 

 

 

a

WMA9 Pro encoded

 

 

 

 

 

AUTO

 

 

 

a

multichannel sources with

 

 

 

6.1ch surround

 

 

 

 

 

 

 

 

 

 

 

 

 

Dolby Digital/DTS/WMA9 Pro

ON

 

 

 

a

encoded multichannel

 

 

 

 

 

 

AUTO

 

 

 

 

a

sources

 

 

 

 

Dolby Digital/DTS/WMA9 Pro

ON

 

a,b

a

encoded stereo source; other

 

 

 

 

 

 

AUTO

 

c

 

a

digital stereo source

 

 

Analog 2-channel (stereo)

ON

 

b

sources

 

 

 

 

 

 

AUTO

 

c

 

 

 

 

a Excluding WMA9 Pro format.

bOnly applicable when using the Virtual Surround Back mode. c Not applicable when using the Virtual Surround Back mode.

Italiano Nederlands Español

Using Midnight and Loudness

The Midnight listening feature allows you to hear effective surround sound of movies at low volume levels. The effect automatically adjusts according to the volume at which you’re listening. The Loudness listening feature can be used to get good bass and treble from music sources at low volume levels.

Press MIDNIGHT (MIDNIGHT/LOUDNESS) to switch between MIDNIGHT, LOUDNESS, and OFF.

Note

1• The Virtual Surround Back mode is not effective when using headphones, Stream Direct, Stereo, Front Stage Surround Advance mode. It is also unavailable if the surround speaker is set to NO in Speaker Setting on page 40 (however, the surround back speaker must be set to NO).

Depending on the input signal and the Listening Mode, the Virtual Surround Back mode may not be effective.

31

En

Page 31
Image 31
Pioneer VSX-817-S/-K operating instructions Using Midnight and Loudness, Using Virtual Surround Back VSB