Listening to your system
When set to DIGITAL or AUTO, 2 DIGITAL lights when a Dolby Digital signal is input, and DTS lights when a DTS signal is input.
Selecting the multichannel analog inputs
If you have connected a decoder or a DVD player with multichannel analog outputs to this receiver (page 13), you must select the analog
multichannel inputs for surround sound.1
1Make sure you have set the playback source to the proper output setting.
For example, you might need to set your DVD player to output multichannel analog audio.
2Press DVD/LD.
3Press SIGNAL SELECT to select the multichannel analog inputs.
DVD 5.1ch shows in the display and the ANALOG indicator lights.
Selecting the front audio inputs
When playing back a component connected to the MCACC/AUDIO IN jack on the front panel, set the source to F.AUDIO on the receiver.
1Press F.AUDIO on the remote control. You can also select the source by pressing VIDEO/FRONT AUDIO on the front panel.
2Playback the connected component.
05
English Deutsch Français Italiano Nederlands Español
Note
1• During playback from the multichannel inputs, you can’t use any of the sound features/modes and only the volume and chan- nel levels can be set.
•You can’t listen to your speaker B (Second Zone) system during playback from the multichannel inputs.
33
En
