05 
Listening to your system
With multichannel sources, if you have connected surround back speaker(s) and have selected SB ON, you can select (according to format):
•2 Pro Logic IIx MOVIE – See above
•2 Pro Logic IIx MUSIC – See above
•Dolby Digital EX – Creates surround back channel sound for 5.1 channel sources and provides pure decoding for 6.1 channel sources (like Dolby Digital Surround EX)
•
Using the Advanced surround effects
The Advanced surround effects can be used for a variety of additional surround sound effects. Most Advanced Surround modes are designed to be used with film soundtracks, but some modes are also suited for music sources. Try different settings with various soundtracks to
see which you like.1
AUTO SURR | F.S.SURRSTEREO/ | STANDARD ADV.SURR | |
PHASE | ACOUSTIC | DIALOG | SOUND |
EQ | RETRIEVER | ||
•Press ‘ADV.SURR’ repeatedly to select a listening mode.
•ACTION – Designed for action movies with dynamic soundtracks.
•DRAMA – Designed for movies with lots of dialog.
•MONOFILM – Creates surround sound from mono soundtracks.
•ROCK/POP – Creates a live concert sound for rock and/or pop music.
•UNPLUGED – Suitable for acoustic music sources.
•
•PHONESUR. – Creates the effect of overall surround with headphones.
Setting the effect options
When using surround effects, there are a number of settings you can adjust.
1Press EFFECT/CH SEL repeatedly to select the setting you want to adjust.
Depending on the current status / mode of the receiver, certain options may not appear. Check the table below for notes on this.
2Use the +/– buttons to set it as necessary. See the table below for the options available for each setting. The defaults, if not stated, are listed in bold.
3Press EFFECT/CH SEL again to adjust other settings.
Setting | What it does | Options | |
Center | Spreads the center channel | 0 to 7 |
|
Widtha | between the front right and left | Default: | 3 |
(Applicable | speakers, making it sound |
|
|
only when | wider (higher settings) or |
|
|
using a cen- narrower (lower settings). ter speaker)
• ENT. SHOW – Suitable for musical sources. | Dimension | a | Adjusts the surround sound | |
| balance from front to back, | Default: 0 | ||
• EXPANDED – Creates an extra wide stereo |
|
| ||
|
| making the sound more distant |
| |
field.2 |
|
| (minus settings), or more |
|
• TV SURR. – Provides surround sound for |
|
| forward (positive settings). |
|
|
|
|
| |
both mono and stereo TV sources. | Panoramaa | Extends the front stereo image | OFF | |
• ADV. GAME – Suitable for video games. |
|
| to include surround speakers |
|
|
| ON | ||
• SPORTS – Suitable for sports programs. |
|
| for a ‘wraparound’ effect. | |
|
|
|
| |
Note
1• If you press ADVANCED SURROUND when the headphones are connected, the PHONES SURROUND mode will automati- cally be selected.
•Depending on the source and the sound mode you have selected, you may not get sound from the surround back speakers in your setup. For more on this, refer to Using surround back channel processing on page 30.
•When an Advanced Surround listening mode is selected, the effect level can be adjusted using the EFFECT parameter in Setting the effect options above.
2 Use with Dolby Pro Logic for a stereo surround effect (stereo field is wider than Standard modes with Dolby Digital sources).
28
En
