Controlling the rest of your system | 11 |
Erasing all of the remote control presets
This will erase all preset remote control preset codes.
1While pressing the RECEIVER button, press the SETUP button.
The remote LCD display shows SETUP.
2 Use | to select RESET then press |
ENTER. |
|
2 Use | to select DIRECT F then press |
ENTER. |
|
3Press the MULTI CONTROL button for the component you want to control then press
ENTER.
The LCD on the remote displays the component you want to control.
4 Use to switch direct function ON or OFF then press ENTER.
The LCD shows OK to confirm the setting.
English Deutsch
3Press and hold ENTER for about two seconds.
The LCD shows OK to confirm the remote presets have been erased.
Direct function
• Default setting: ON
You can use the direct function feature to control one component using the remote control while at the same time, using your receiver to playback a different component. This could let you, for example, use the remote control to set up and listen to a CD on the receiver and then use the remote control to rewind a tape in your VCR while you continue to listen to your CD player.
Confirming preset codes
Use this feature to check which preset code is assigned to a MULTI CONTROL button.
1While pressing the RECEIVER button, press the SETUP button.
The remote LCD display shows SETUP.
2 Use | to select READ ID then press |
ENTER. |
|
3Press the MULTI CONTROL button of the component for which you want to check the preset code then press ENTER.
The brand name and preset code appears in the display for three seconds.
Français Italiano Nederlands
When direct function is on, any component you select (using the MULTI CONTROL buttons) will be selected by both the receiver and the remote control. When you turn direct function off, you can operate the remote
control without affecting the receiver.1
1While pressing the RECEIVER button, press the SETUP button.
The remote LCD display shows SETUP.
Multi Operation and System Off
The Multi Operation feature allows you to program a series of up to 5 commands for the components in your system. For example, you could turn on your TV, turn on your DVD player and start playing the loaded DVD using only two buttons on the remote control.
Similar to multi operations, System Off allows you to use one button to stop and switch off a series of components in your system at the
same time.2
Español
Note
1You can’t use direct function with the TV CTRL function.
2• Before Multi Operation and System Off will work correctly, you must setup the remote to work with your TV and other com- ponents (see Setting the remote to control other components on page 50 for more on this).
•Some units may take some time to power up, in which case multiple operations may not be possible.
•Power on and off commands only work with components that have a standby mode.
53
En