Controlling the rest of your system | 11 |
Using multi operations
Using System off
You can start multi operations with the receiver switched on, or in standby.
STANDARD | ADV.SURR STEREO AUTO SURR |
MULTI OPE | S.RETRIEVER ACOUSTIC EQ SIGNAL SEL |
SHIFT | EFFECT/CHSEL |
RECEIVER
RECEIVER SELECT | SYSTEM OFF |
SOURCE | |
INPUT |
|
AV |
|
REMOTE CONTROL UNIT |
|
DVD TV DVR TV CTRL
STANDARD | ADV.SURR STEREO AUTO SURR |
MULTI OPE | S.RETRIEVER ACOUSTIC EQ SIGNAL SEL |
SHIFT | EFFECT/CHSEL |
RECEIVER
English Deutsch
1 Press MULTI OPE.
MULTI OP flashes in the display.
2Press an input source button that has been set up with a multi operation.
The receiver switches on (if it was in standby) and the programmed multi operation is performed automatically.
1 Press MULTI OPE.
MULTI OP flashes in the display.
2 Press SOURCE.
The command sequence you programmed will run, then all Pioneer components will switch
off1, followed by this receiver.
Français Italiano
Controls for TVs
This remote control can control components after entering the proper codes or teaching the receiver the commands (see Operating other Pioneer components on page 50 for more on this). Use the MULTI CONTROL buttons to select the component.
•The TV CONTROL buttons on the remote control are dedicated to control the TV assigned to the TV CTRL button. If you have two TVs, assign the main TV to the TV CTRL button.
| Button(s) | Function | Components |
|
| TV | Press to switch the component assigned to the TV CTRL | Cable TV/Satellite TV/TV |
|
|
| button on or off. |
|
|
|
|
|
|
|
| INPUT | Switches the TV input. (Not possible with all models.) | TV |
|
| SELECT |
|
|
|
|
|
|
|
|
| TV CH +/– | Selects channels. | Cable TV/Satellite TV/TV |
|
|
|
|
|
|
| TV VOL +/– | Adjust the TV volume. | Cable TV/Satellite TV/TV |
|
|
|
|
|
|
| SOURCE | Press to switch the component assigned to the TV CTRL | Cable TV/Satellite TV/TV |
|
|
| button on or off. |
|
|
|
|
|
|
|
|
| Use to choose the ‘A’ commands on a Satellite TV menu. | Satellite TV |
|
|
|
|
|
|
|
| Use to choose the RED/B commands on a Satellite TV/TV | Satellite TV/TV |
|
|
| menu. |
|
|
|
|
|
|
|
|
|
|
|
|
Note
1In order to avoid accidently switching off a DVD recorder that is currently recording, no DVD recorder power off codes are sent.
Nederlands Español
55
En
