Listening to your system | 05 |
Setting | What it does | Options | • While listening to a source, press | |
STEREO/F.S.SURR to select Front Stage | ||||
|
|
| ||
Effect | Sets the effect level for the | 10 to 90 | ||
Surround Advance modes. | ||||
| currently selected Advanced | • STEREO – See Listening in stereo above for | ||
| Surround mode (each mode |
| ||
|
| |||
| can be set separately). |
| ||
|
| • F.S.S.FOCUS – Use to provide a rich | ||
|
|
| ||
a Only available with 2 ch sources in Dolby Pro Logic IIx Mu- | ||||
surround sound effect directed to the | ||||
sic mode (also available with 2 Pro Logic II | 5.1sound). | |||
center of where the front left and right | ||||
b Only available with 2 ch sources in Neo:6 Music mode. | ||||
speakers sound projection area converges.
English Deutsch
Listening in stereo
When you select STEREO you will hear the source through just the front left and right speakers (and possibly your subwoofer depending on your speaker settings).
Dolby Digital and DTS multichannel sources are downmixed to stereo.
AUTO SURR | STEREO/ | STANDARD ADV.SURR |
F.S.SURR |
•While listening to a source, press STEREO/F.S.SURR for stereo playback. Press repeatedly to switch between:
•STEREO – The audio is heard with your surround settings and you can still use the Midnight, Loudness, and Tone functions.
•F.S.S.FOCUS – See Using Front Stage Surround Advance below for more on this.
•F.S.S. WIDE – See Using Front Stage Surround Advance below for more on this.
•F.S.S. WIDE – Use to provide a surround sound effect to a wider area than FOCUS mode.1
| FOCUS position (Recommend) | WIDE position |
| ||
| Front left | Front right | Front left | Front right |
|
| speaker | speaker | speaker | speaker |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Using Stream Direct
Use the Stream Direct modes when you want to hear the truest possible reproduction of a source. All unnecessary signal processing is bypassed.
AUTO SURR | STEREO/ | STANDARD ADV.SURR |
F.S.SURR |
•While listening to a source, press AUTO SURR to select the Stream Direct mode.
Français Italiano Nederlands Español
Using Front Stage Surround Advance
The Front Stage Surround Advance function allows you to create natural surround sound effects using just the front speakers and the subwoofer.
AUTO SURR | STEREO/ | STANDARD ADV.SURR |
F.S.SURR |
•AUTOSURR. – See Auto playback on page 29.
•DIRECT – Sources are heard according to the settings made in the Surround Setup (speaker setting, channel level, speaker distance), as well as with dual mono, Center Width, Dimension and Panorama settings. You will hear sources according
Note
1When using F.S.S. WIDE, a better effect can be obtained if Auto MCACC Setup is performed. For more on this, refer to Automatically setting up for surround sound (MCACC) on page 9.
31
En
