Pioneer VSX-917V-S/-K manual Other Settings, The Other Setup menu, Assigning the HDMI inputs

Other Settings 12

2Select the number of the component

video input to which you’ve connected your video component.

The numbers correspond with the numbers beside the inputs on the back of the receiver.

3Select the component that corresponds with the one you connected to that input. Select between DVD, TV, DVR or OFF.

• Use and ENTER to do this.

•Make sure you have connected the audio from the component to the corresponding inputs on the rear of the receiver.

•If you connect any source component to the receiver using a component video input, you should also have your TV connected to this receiver’s component video MONITOR output (down converting component video is not possible after assigning an input).

4When you’re finished, press RETURN. You return to the Input Assign menu.

Assigning the HDMI inputs

•Default settings:

HDMI - 1 – DVD

HDMI - 2 – TV

You only need to do this if you didn’t hook up your HDMI equipment according to the default settings for the HDMI inputs (see above), so that you see the proper video signal when you select the input source.

1Select ‘HDMI Input’ from the Input Assign menu.

5. Input Assign

a.Digital Input b.Component Input c.HDMI Input

:Return

2Select the number of the HDMI input to which you’ve connected your video component.

The numbers correspond with the numbers beside the inputs on the back of the receiver.

3 Select the component that corresponds
with the one you connected to that input.									English
Select between DVD, TV, DVR or OFF.
• Use				and ENTER to do this.
• To hear audio from your HDMI component
	(through this system), you must also make
	separate audio connections to the								Deutsch
	corresponding inputs on the rear of the
	receiver. For more on this, see Connecting
	using HDMI on page 57.
• If you connect any video component to the
	receiver using HDMI, you should also have								Français
4 When you’re finished, press RETURN.
	your TV connected to this receiver’s HDMI
	output.
You return to the Input Assign menu.									Italiano
The Other Setup menu is where you can make
The Other Setup menu
customized settings to reflect how you are
using the receiver.									Nederlands
1 Press RECEIVER on the remote control,
then press the SETUP button.
An on-screen display (OSD) appears on your
TV. Use					and ENTER on the remote
control to navigate through the screens and
select menu items. Press RETURN to confirm									Español
and exit the current menu.
2 Select ‘Other Setup’ then press ENTER.
	System Setup					6.Other Setup
		1.Surr	Back System
							a.DRC	Setup
		2.Auto	MCACC				b.Dual	Mono Setup
		3.Manual		MCACC			c.LFE	ATT Setup
		4.Manual		SP Setup			d.SR+	Setup
		5.Input	Assign				e.DVC	Setup
		6.Other	Setup
				: Exit				:Return

3 Select the setting you want to adjust.

If you are doing this for the first time, you may want to adjust these settings in order:

•DRC Setup – Specify the amount of dynamic range adjustment to Dolby Digital or DTS soundtracks (see Dynamic Range Control Setup on page 64).

63

En