Pioneer VSX-917V-S/-K Using the SR+ mode with a Pioneer plasma display, English Deutsch Français

Other connections 11

•Use a 3-ringed miniplug SR+ cable1 to connect the CONTROL IN jack of this receiver with the CONTROL OUT of your plasma display.

Before you can use the extra SR+ features, you need to make a few settings in the receiver. See SR+ Setup for Pioneer plasma displays on page 65 for detailed instructions.

VIDEO	Pioneer plasma	VIDEO
INPUT 1		INPUT 2
	display

Using the SR+ mode with a Pioneer plasma display

When connected using an SR+ cable, a number of features become available to make using this receiver with your Pioneer plasma display even easier. These features include:

•On-screen volume display.

•On-screen display of listening mode.

•Automatic video input switching on the plasma display.

•Automatic volume muting on the plasma

display.2

See also SR+ Setup for Pioneer plasma displays on page 65 for more on setting up the receiver.

English Deutsch Français

DVD player	Satellite receiver, etc
DVD	TV/SAT
AUDIO IN	AUDIO IN
	VSX-917V

RECEIVER SELECT	SOURCE
INPUT
AUDIO/VIDEO PRE-PROGRAMMED
REMOTE CONTROL UNIT

F.AUDIO

DVD TV DVR TV CTRL

CD-R/TAPE USB

CD FM AM RECEIVER

SLEEP	SB ch	ANALOG
		ATT
SR+	DIMMER	MIDNIGHT
SIGNAL SEL
D.ACCESS +10		CLASS DISC
		ENTER
TOP MENU		MENU
TUNE
ST	ST	T.EDIT

Italiano Nederlands

This receiver

To make the most of the SR+ features, you should connect your source components (DVD player, etc.) in a slightly different way to that described in this chapter. For each component, connect the video output directly to the plasma display, and just connect the audio (analog and/or digital) to this receiver.

1Make sure that the plasma display and this receiver are switched on and that they are connected with the SR+ cable.

See Using this receiver with a Pioneer plasma display above for more on this.

2To switch SR+ mode on/off, press RECEIVER, then the SR+ button.

The front panel display shows SR+ ON or OFF.

Español

Note

1• The 3-ringed SR+ cable from Pioneer is commercially available under the part number ADE7095. Contact the Pioneer Cus- tomer Support division for more information on obtaining an SR+ cable (you can also use a commercially available 3-ringed mini phone plug for the connection).

•If you connect to a Pioneer plasma display using an SR+ cable, you will need to point the remote control at the plasma dis- play remote sensor to control the receiver. In this case, you won’t be able to control the receiver using the remote control if you switch the plasma display off.

2The automatic volume muting feature is enabled separately; see SR+ Setup for Pioneer plasma displays on page 65.

61

En