QUICK START GUIDE
ZSelect the Transfer menu item and choose the Send File option.
ZEnter the location of the configuration file and select Xmodem for the protocol.
ZClick on the Send button.
The file will start to load as shown below:
ZOnce the transfer is complete, the switch will have to be rebooted either by entering Reboot or by switching the power off then on.
ML1600/2400# reboot
Proceed on rebooting the switch? [Y or N] Y
Rebooting now...
ZOnce the switch has rebooted, login and verify that the configuration was loaded correctly.
This completes the upgrade process.
QS.6.4 Updating Using the EnerVista Web Interface Software
Use the following steps to install the EnerVista Secure Web Management software.
ZDownload the latest MultiLink firmware from the GE Multilin web site to a convenient location on your hard drive.
MULTILINK ML1600/2400 ETHERNET COMMUNICATIONS SWITCH – QUICKSTART GUIDE |
