QUICK START GUIDE
ML1600/2400# reboot
Proceed on rebooting the switch? [Y or N] Y
Rebooting now...
ZLogin to the switch and use the show version command to verify the version.
ML1600/2400# show version
ZIf necessary, upload the configuration file using the following commands.
If the current firmware is older than 1.7.3, use the loadconf command as shown below:
ZIf the current firmware is older than 1.7.3, enter the xmodem command as shown below:
MULTILINK ML1600/2400 ETHERNET COMMUNICATIONS SWITCH – QUICKSTART GUIDE |
