QUICK START GUIDE

ZSelect the Enter key.

The switch will ask if you would like to reboot the switch.

ZSelect Y for yes and Y again to save the new settings.

ZOnce the switch has completed a reboot, the new IP and subnet mask will be in effect.

Once the switch has rebooted you will need to log in again. To confirm that the IP address and subnet mask were saved correctly enter the command show setup followed by the Enter key. The Multilink switch will then provide an on-screen list of the switch settings including the switch IP address and subnet mask and if programmed, the default gateway. Once you have verified that the IP, subnet mask and default gateway settings are correct you can configure the switch via the web interface.

MULTILINK ML1600/2400 ETHERNET COMMUNICATIONS SWITCH – QUICKSTART GUIDE

QS–17

Page 21
Image 21
GE ML1600, ML2400 quick start QS-17