GE ML1600, ML2400 Select Run then enter CMD to start the DOS shell, Addresses now being used

QUICK START GUIDE

ZSelect Run then enter CMD to start the DOS shell.

Addresses now being used

Once the DOS shell has launched, you will be presented with a DOS window.

ZAt the DOS prompt enter the command ipconfig followed by the Enter key.

This is the command that will cause the Ethernet adaptor to immediately use the IP, and Subnet Mask addresses just programmed. An on-screen report will appear indicating which addresses are now being used by the adapter. The computer’s configuration is complete.

MULTILINK ML1600/2400 ETHERNET COMMUNICATIONS SWITCH – QUICKSTART GUIDE QS–21