QUICK START GUIDE
ZLocate and click on the Ethernet card (it will have TCPIP Protocol as part of its name).
The Ethernet card is typically referred to as an Ethernet adaptor.
ZSelect Use the following IP address then enter a unique IP address (from 3.94.247.001 to 3.94.247.254 if using our test network address range).
ZEnter the subnet mask which, if using our test network, will be 255.255.252.0.
ZSelect OK, then OK again to exit the LOCAL AREA NETWORK PROPERTIES menu.
ZConnect the computer’s Ethernet port to the switch using a
ZEnsure that the link LED come on, on both the switch and PC.
| MULTILINK ML1600/2400 ETHERNET COMMUNICATIONS SWITCH – QUICKSTART GUIDE |
