Pioneer VSX-D811S Playing sources Choosing the input signal, Listening to multi-channel playback

05Playing sources

Choosing the input signal

You need to hook up a component to both analog and digital inputs on the rear of the receiver to select between input signals.

SOURCE			RECEIVER
DVD		TV	VCR		CD-R
		MULTI CONTROL
RCV		CD	TUN		TVC
1		2			3
TEST TONE		INPUT ATT		FL DIMMER
4		5			6
CH SELECT			LEVEL
7		8			9
+10			EFFECT		DISPLAY
		0			DISC
				ENTER
DTV INFO	MPX/RETURN		D.ACCESS		T.EDIT/GUIDE
¶		7	3		8
BAND		CLASS	DTV ON/OFF		DTV MENU
1		¡	4		¢
TOP MENU		AUDIO	SUB TITLE		ANGLE
REMOTE SETUP	STANDARD		ADV.SURR.		STEREO
INPUT SEL.	SIGNAL SEL		MIDNIGHT/		MUTE
			LOUDNESS
		RECEIVER CONTROL
		TUNE
ST		SETUP			ST

ENTER

TUNE

CHANNEL

•Press SIGNAL SEL (SIGNAL SELECT) to select the input signal corresponding to the source component.

Each press switches between AUTO, DVD 5.1 ch/DVD 7.1ch, ANALOG and DIGITAL. The default is AUTO.

DVD 5.1ch (VSX-D711) and DVD 7.1ch (VSX- D811S) will only appear when DVD/LD is selected using the remote or the MULTI JOG/ INPUT SELECTOR dial on the front panel.

When set to DIGITAL, 2DIGITAL lights when a Dolby Digital signal is input, and DTS lights when a DTS signal is input.

•This receiver can only play back Dolby Digital, PCM (32kHz, 44kHz, 48kHz, and 96 kHz) and DTS digital signal formats. With other digital signal formats, set to

ANALOG.

34

En

XRB3013A.32.37 34

•You may get digital noise when a LD or CD player compatible with DTS is playing an analog signal. To prevent noise, make the proper digital connections (page 14) and set the signal input to DIGITAL.

•Some DVD players don’t output DTS signals. For more details, refer to the instruction manual supplied with your DVD player.

Listening to multi-channel playback

SOURCE			RECEIVER
DVD		TV	VCR		CD-R
		MULTI CONTROL
RCV		CD	TUN		TVC
1		2			3
TEST TONE		INPUT ATT		FL DIMMER
4		5			6
CH SELECT			LEVEL
7		8			9
+10			EFFECT		DISPLAY
		0			DISC
				ENTER
DTV INFO	MPX/RETURN		D.ACCESS		T.EDIT/GUIDE
¶		7	3		8
BAND		CLASS	DTV ON/OFF		DTV MENU
1		¡	4		¢
TOP MENU		AUDIO	SUB TITLE		ANGLE
REMOTE SETUP	STANDARD		ADV.SURR.		STEREO
INPUT SEL.	SIGNAL SEL		MIDNIGHT/		MUTE
			LOUDNESS
		RECEIVER CONTROL
		TUNE
ST		SETUP			ST

ENTER

TUNE

CHANNEL

1Switch on the playback component.

2Select the source you want to playback. Use the MULTI CONTROL buttons on the remote (or MULTI JOG/INPUT SELECTOR dial on the front panel).

3Press STANDARD.

If the source is Dolby Digital, DTS, or Dolby Surround encoded, the proper decoding format will automatically be selected and shows in the display.

01.12.12, 4:44 PM