Pioneer VSX-D711, VSX-D811S manual Using Stereo/Direct, Using Advanced Surround, NEO6

Playing sources

If you are listening to a two channel source, each press changes the display as follows:

Pro Logic II Movie

Pro Logic		Pro Logic
		II Music
	NEO:6	NEO:6
	Music*	Cinema*

*VSX-D811S only

Refer to page 32 for more details about each mode.

4Start playback of the component you selected in step 1.

Using Stereo/Direct

When you select STEREO or DIRECT, you will hear the source through just the front left and right speakers (and possibly your subwoofer depending on your speaker settings). Dolby Digital and DTS multichannel sources are downmixed to stereo. See page 32 for more on these modes.

•Press STEREO (STEREO/DIRECT on the front panel) repeatedly to switch between the two options.

If you switch on Midnight listening, Loudness, or the Tone controls when DIRECT is selected, the receiver automati- cally switches to STEREO.

05

Using Advanced Surround

When you select one of the Advanced surround options, Dolby Pro Logic, Dolby Digital and DTS decoding is done automatically corresponding to the input signal. Use Advanced surround to add effects to the surround sound.

•Press ADV.SURR. (ADVANCED SUR- ROUND) repeatedly to cycle the sound options.

Each press changes the display as follows:

Movie Music

Virtual SB

5-Stereo*/ Expanded

6-Stereo**

*VSX-D711

**VSX-D811S

Refer to page 33 for more details about each surround effect.

The Advanced surround effects can be adjusted in the range of 10 to 90 (the default setting is 70) by pressing RCV then pressing EFFECT +/– . The effect level can be set for each Advanced surround mode. The Standard mode cannot be changed.

35

En

XRB3013A.32.37 35 01.12.12, 4:44 PM