Connecting up

Connecting antennas

Connect the AM loop antenna and the FM wire antenna as shown below. To improve reception and sound quality, connect external antennas (see Using external antennas below). Always make sure that the receiver is switched off and unplugged from the wall outlet before making or changing any connections.

03

Antenna snap connectors

Twist the exposed wire strands together and insert into the hole, then snap the connector shut.

3/8 in. (10mm)

AM LOOP

Using external antennas

ANTENNA

To improve FM reception

 

 

Connect an external FM antenna.

 

 

FM

 

 

UNBAL

 

 

75

FM WIRE

 

 

ANTENNA

 

 

 

 

FM

FM wire antenna

75

ANTENNA

coaxial cable

Connect the FM wire antenna and fully extend vertically along a window frame or other suitable area, etc.

AM loop antenna

Assemble the antenna and connect to the receiver. Attach to a wall, etc. (if desired) and face in the direction that gives the best reception.

To improve AM reception

Connect a 15-18 feet length of vinyl-coated wire to the AM antenna terminal without disconnect- ing the supplied AM loop antenna.

For the best possible reception, suspend horizontally outdoors.

 

Outdoor antenna

Indoor

 

antenna

 

(Vinyl-

15-18 ft. (5–6m)

coated

 

wire)

AM LOOP

 

ANTENNA

19

En

XRB3013A.13.25

19

01.12.12, 4:42 PM

Page 19
Image 19
Pioneer VSX-D711, VSX-D811S manual Connecting up Connecting antennas, FM wire antenna, AM loop antenna