
Connecting with a cable or satellite set-top box (STB)
You can connect your computer to cable service access that uses a
When using the STB setup:
A standard TV remote control cannot be used to change TV channels. You can use your TV remote control to set the TV to the
You may be able to use a universal remote control or commander to change TV channels, if the device is able to control the STB.
Cable/satellite service, equipment, and features, may vary between service providers. Contact your cable or satellite service provider for details on using STB equipment and accessories.
Option 1
1.Connect one end of a TV coaxial cable (optional) to your cable service access. Connect the other end to the In jack on the back panel of your
2.Connect a second TV coaxial cable (optional) to the Out jack on your STB. Connect the other end to the
3.Connect a third TV coaxial cable (supplied) to the
4.Connect a fourth TV coaxial cable (optional) to the
To connect in STB mode (Option 1)
Option 2
1.Connect one end of the TV coaxial cable (supplied) to your cable service access. Connect the other end to the In jack on the back panel of your
2.Connect a second TV coaxial cable (optional) to the Out jack on your STB unit. Connect the other end to the VHF/UHF port on the rear of your TV monitor or display.
Page 158