Inserting a battery
To insert a battery
1.First turn the computer over so the bottom panel is facing up.
2.Slide the LOCK/UNLOCK switch to UNLOCK, and then slide the RELEASE switch in the direction of the arrow to lift the battery bay cover.
Opening the Battery Bay
3.Slide the battery (with the logo facing up) into the battery bay cover. The two hooks on each side of the battery bay cover should click into the grooves on the battery.
Inserting a Battery
4.With the battery securely inserted into the battery bay cover, align the hooks on the battery bay cover with the grooves inside the battery bay.
5.Lower the battery into the battery bay until you hear it click.
Securing the Battery
6.Slide the LOCK/UNLOCK switch to LOCK.
If a port replicator is attached to your computer, do not insert or remove the battery. Lifting and turning the computer
with a port replicator attached could cause a temporary loss of power. | Page 44 |
|
