Setting up the receiver

06

Surround back channel input setting

(VSX-D811S only)

Default setting: SB 2ch IN

You only have to make this setting if you are using a seperate component for decoding DVDs, and the component has only one surround back channel output. If this is the case, select SB 1ch IN, otherwise leave it set to

SB 2ch IN.

Use or to select SB 2ch IN or

SB 1ch IN.

Coaxial digital input settings

Here you tell the receiver what components you have hooked up to the coaxial DIGITAL IN jacks 1 and 2 on the back of the receiver.

Coaxial digital 1:

Default settings: DVD/LD

1Use or to assign the coaxial digital

1input (DVD, TV, CD, CD-R, VCR or OFF).

Optical digital input settings

Here you tell the receiver what components you have hooked up to the optical DIGITAL IN jack(s) on the back of the receiver.

Optical digital 1:

Default settings: TV/SAT

1Use or to assign the optical digital

1input (DVD, TV, CD, CD-R, VCR or OFF).

Optical digital 2

(VSX-D811S only):

Default setting: CDR/TAPE/MD

2Use or to assign the optical digital

2input (DVD, TV, CD, CD-R, VCR or OFF). After you assign a component to a digital jack, whenever you select that component, (for example, a DVD player) the receiver automatically changes to the digital input setting and DIGITAL shows in the display.

Coaxial digital 2:

Default setting: CD

2Use or to assign the coaxial digital

2input (DVD, TV, CD, CD-R, VCR or OFF). After you assign a component to a digital jack, whenever you select that component, (for example, a DVD player) the receiver automatically changes to the digital input setting and DIGITAL shows in the display.

43

En

XRB3013A.38.44

43

01.12.12, 4:46 PM

Page 43
Image 43
Pioneer VSX-D711 manual Surround back channel input setting, Coaxial digital input settings, Optical digital input settings