04Getting started
Chapter 4:
Getting started
When you use the unit for the first time, the following screens will be displayed.
Set up the following items to customize the unit.
1 Press STANDBY/ON.
About twenty seconds after turning on the power, the following splash screen appears. About one minute is required between turning the power on and completion of startup.
Setting Quick Start Mode to On will allow faster startup (page 29).
2Use PLAY to activate Demo Mode or use STOP to deactivate Demo Mode.
The screen below will automatically appear after the screen in step 1.
•Demo Mode also can be activated in Auto mode select (page 29).
Select "Start" to start Demo mode; otherwise "Cancel".
[PLAY] Start
[STOP] Cancel
•When Start is selected, the demo mode operates. When starting up the next time, it will be necessary to set step 3.
•If Cancel is selected, operation will automatically proceed to step 3.
14
3Use /to select the menu language of this unit, then press ENTER.
Language
English
Français
Deutsch
Nederlands
The setting is done.
En